For more information, you can also refer to "Failover with Super Path" in CCBoot v3.0 Wiki, and video of "Failover with Super Path in CCBoot v3.0" on Youtube.
Features
CCBoot Super Path is based on iSCSI failover technology. It is used for making double server run at the same time, if one of servers has broken, another server can continue to run and it will not affect PC on clients, it’s not necessary to reboot the client PC even. Furthermore, the rapid connection is another advantage of CCBoot Super Path. That’s to say, it wouldn’t delay any time when switching the server.
Steps for Installation
- You need to install CCBoot version 20120327, then please follow the instructions: open CCBoot->"options", It will appear "CCBoot Options"dialogue box please fill"iqn.2008-12.com.ccboot.www"in "iSCSI Target Name"box.
- Install CCBootClient version 20120327 on client which has disc, then upload the image
- Please boot PC by super client with the image you have upload , then open client interface and press "Ctrl+H" to install Super Path drive. Please notice that this step must be finished under diskless booting.
- It’s necessary to reboot your PC on client and then power off it. And disable the super client. Copy the image you have finished to both servers. And the name of image and location should be same.
- Add the same clients on both server including PC’s name, IP Address, boot image path, and game disk’s path. But the location to write back file can be different. Importantly, please fill the two server addresses on "Boot Server Address", and splite the IP Addresses by semicolon. Furthermore, please click to select "Enable Failover".