Wiki Home Troubleshoots How to optimize system image
How to optimize system image
2020/08/07 20:19
Optimizing system image
After motherboard drivers finish installing restart, after restarting apply this tweaks
Before installing ccboot client follow this tutorial.
1. Click “start” right click my computer properties device manager/advance see below
Or right click on desktop click “personalize” then choose basic theme (Figure 1).
Figure 1
2. Advance click “setting” follow the box and arrow as shown in the image click “apply” button (Figure 2)
Figure 2
3.Turn off system protection, max usage slide to the left as shown in the image, click delete now click “ok” button (Figure 3).
Figure 3
4. Turn off two windows firewall in control panel click “ok” button (Figure 4).
Figure 4
5. Turn off firewall in control panel, windows firewall with advanced security click “ok” button (Figure 5).
Figure 5
6. Control panel, windows update choose never check for updates (Figure 6).
Figure 6
7. Control panel, action center settings uncheck all click “ok” button (Figure 7).
Figure 7
8. Control panel, click administravire tools (Figure 8).
Figure 8
9. Now click services (Figure 9)
Figure 9
10. In windows service scroll down, disable windows firewall (Figure 10)
Figure 10
11. Click startup type select disable click “apply” button (Figure 11).
Figure 11
12. Now disable windows update, do the same in windows firewall (Figure 12).
Figure 12
13. Click startup type select disable click “apply” button (Figure 13)
Figure 13
Optimizing Lan network
14. Control panel, all control panel items, click “network and sharing center” click “change adapter settings (Figure 14).
Figure 14
15. Now right click “local area connection” click properties (Figure 15).
Figure 15
16. Uninstall all highlighted then click “ok” button (Figure 16).
Figure 16
17. Click “configure” button (Figure 17)
Figure 17
1. Disable all highlighted click “ok” button (Figure 18).
Figure 18
19. Set full speed and duplex to 1 gbps click “ok” button (Figure 19).
Figure 19
Disabling startup apps
20. Click “start” button, type run windows pop up then type msconfig click “ok” button (Figure 20)
Figure 20
21. New pop up windows click “startup” tab uncheck all highlighted click “apply” button (Figure 21)
Figure 21
22. Disabling service do the same in startup (Figure 22).
Figure 22
23. Click “exit without restarting” button and check do not show the message again
(Figure 23)
Figure 23
Disk clean up
24. Clearing some unnecessary file check all as image shown click “delete files” button
(Figure 24).
Figure 24
25. Clearing temporary files, click windows key + r then type %temp% (Figure 25).
Figure 25
26. Delete all file hold shift then press delete so that it will not goes to recycle bin
(Figure 26).
Figure 26
27. Now restart pc (Figure 32).
Figure 27
Proper way installing CCBoot client
28. Click “next button” (Figure 28)
Fiure 28
29. Select start menu folder click “next” button (Figure 29)
Figure 29
30. Ready to install ccboot click “next” button (Figure 30).
Figure 30
31. Now click “finish” button launch ccboot client (Figure 31).
Figure 31
32. Start install client click “yes” button to begin installing (Figure 32).
Figure 32
33. Do you want to optimize system click “yes” button (Figure 33
Figure 33
34. Install pnp nic, if you are using realtek lan check realtek nic drivers as shown in the image but if you don't know exactly your lan nic select all nic drivers then click “ok” button (Figure 34).
Figure 34
35. Now click "ok" Button (Figure 35).
Figure 35
36. After installing lan nic drivers, restart pc click “yes” button (Figure 36)
Figure 36
Creating system image using “disk2vhd”
37. Disk2vhd tool Disk2vhd
Open disk2vhd (Figure 37).
Figure 37
38. Install disk2vhd click “agree” button (Figure 38).
Figure 38
39. After installing, select your destination folder and follow the red box as shown in the image (Figure 39).
Figure 39
40. Now click “save” button (Figure 40)
FIgure 40
Once done get your ssd/hdd put the drive on your server copy the vhd file and paste it to your image disk CCboot add image
Do the same in windows 10
we created image for motherboard h81 chipset its works on asus, msi, gigabyte, biostar, ecs, WIN7x64
Related:
Use Net Limiter on CCBoot client
Fix Windows 10 activation issue on CCBoot client
Update CCBoot older version to new