 |
How to make one image that supports different client PCs? Suppose you have 3 clients (A, B, and C) with different devices, and you want to create only one image to boot all of them.
1. Install same version of Windows XP on these 3 clients.
2. Install CCBoot client on these 3 clients. Press the "Install CCBoot Client" button to install.
3. Copy "CCBootPNP" from the installation folder to a USB disk.
4. Insert the USB disk on the client B. Launch CCBootPNP from the USB disk and press the "Get Local PCI Drivers" button to collect drivers of the client B.
5. Plug the USB disk from the client B and insert it on the client C. Launch CCBootPNP from the USB disk and press the "Get Local PCI Drivers" button to collect drivers of the client C.
6. Plug the USB disk from the client C and insert it on the client A. Launch CCBootPNP from the USB disk and press the "Get Local PCI Drivers" button to collect drivers of the client A.
7. Press the "Install All PCI Drivers" button to install these 3 clients' drivers on the client A.
8. Upload image from the client A and this image can be used for booting the client A, B, and C.
|
|
|
Popular Links
|
|
CCBoot - iSCSI Boot Windows Diskless
© 2000 Youngzsoft all rights reserved
|
HOME
FEATURES
